| FIRE STANDARDS |
|
| Fire resistance |
| Test Methods for: |
| E 119-00a |
Fire Tests of Building Construction and Materials |
| E 814-02 |
Fire Tests of Through-Penetration Fire Stops |
| E 1966-01 |
Fire Resistive Joint System |
|
| GYPSUM AND RELATED BUILDING MATERIAL AND SYSTEMS |
|
| Specifications and Test Methods for Accessories and Related Products |
| Specifications for: |
| C 1047-04 |
Accessories for Gypsum Wallboard and Gypsum Veneer Base |
| C 897-00 |
Aggregate for Job-Mixed Portland Cement-Based Plasters |
| C 631-95a(2004) |
Boundig Compounds for Interior Gypsum Plastering |
| C 35-01 |
Inorganic Aggregates for Use in Gypsum Plastering |
| C 475/C 475M-02 |
Joint Compound and Joint Tape for Finishing Gypsum Board |
| C 955-03 |
Load Bearing (Transverse and Axial) Steel Studs, Runners, (Tracks), and Bracing for Screw Application of Gypsum Panel Products and Metal Plaster Bases |
| C 847-04 |
Metal Lath |
| C 514-04 |
Nails for the Application of Gypsum Board |
| C 645-04a |
Non structural Steel Framing Members |
| C 954-04 |
Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. to 0.112 in. in Thickness |
| C 1002-04 |
Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
| C 932-03 |
Surface-Applied Bonding Compounds for Exterior Plastering |
| C 933-04 |
Welded Wire Lath |
| C 1032-04 |
Woven Wire Plaster Base |
| Test Methods for: |
| C 474-05 |
Joint Treatment Materials for Gypsum Board Construction |
|
|
| Specifications and Test Methods for Gypsum Products |
| Specifications for: |
| C 1278 / C 1278M-03 |
Fiber-Reinforced Gypsum Panel |
| C 1177 / C 1177M-04 |
Glass Mat Gypsum Substrate for Use as Sheathing |
| C1178 / C 1178M-04 |
Glass Mat Water-Resistant Gypsum Backing Panel |
| C588 / C 588M |
Gypsum Base for Veneer Plasters |
| C 1396 / C 1396M-04 |
Gypsum Board |
| C 59 / C59M-00 |
Gypsum Casting Plaster and Gypsum Molding Plaster |
| C 317 / C 317M -00 |
Gypsum Concrete |
| C 61 / C 61M-00 |
Gypsum Keene's Cement |
| C 28 / C28M-00 |
Gypsum Plasters |
| C 587-04 |
Gypsum Veneer Plaster |
| C 22 / C 22M-00 |
Gypsum |
| Test Methods for: |
| C 473-03 |
Physical Testing of Gypsum Panel Products |
| C 472-99(2004) |
Physical Testing of Gypsum, Gypsum Plasterers and Gypsum Concrete |
|
|
| Specifications for the Application of Gypsum and Other Products in Assemblies |
| Specifications for: |
| C 840-04a |
Application and Finishing of Gypsum Board |
| C 844-04 |
Application of Gypsum Base to Receive Gypsum Veneer Plaster |
| C 1280-04 |
Application of Gypsum Sheathing |
| C 843-99 |
Application of Gypsum Veneer Plaster |
| C 842-99 |
Application of Interior Gypusm Plaster |
| C 926-98a |
Application of Portland Cement-Based Plaster |
| C 956-04 |
Installation of Cast-In-Place Reinforced Gypsum Concrete |
| C 841-03 |
Installation of Interior Lathing and Furring |
| C 1063-03 |
Installation of Lathing and Furring to Receive Interior and Exterior Portlant Cement-Based Plaster |
| C 1007-04 |
Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories |
| C 754-04 |
Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products |
|
| Cement Plaster/Stucco |
|
| Specifications and Test Methods for Cement Plaster/Stucco |
| Specifications for: |
| C 91 |
Masonry Cement |
| C 150 |
Portland Cement |
| C 207 |
Hydrated Lime for Masonry Purposes |
| C 595 |
Blended Hydraulic Cements |
| C 897 |
Aggregates for Job-Mixed Portland Cement-Based Plasters |
| C 1157 |
Hydraulic Cement |
| C 1329 |
Mortar Cement |
| Specifcation of Installation for: |
| C 926 |
Portland Cement-Based Plaster |
|
| LIME |
|
| Structural Lime |
| Specifications for: |
| C 206-03 |
Finished Hydrated Lime |
|
| METALIC-COATED IRON AND STEEL PRODUCTS |
|
| Sheet Specifications |
| Specifications for: |
| A 792 / A 792M-03 |
Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
| A 795 / A 795M-03 |
Steel Sheet, Metalic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
| A 875 / A 875M-02a |
Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process |
| A 653 / A 653M-04a |
Steel Sheet, Zinc Coated (Galvanized) or Zinc-Iron Alloy Coated (Galvannealed) by the Hot-Dip Process |
|
|
| Structual Shapes and Hardware Specifications |
| Specifications for: |
| A 123 / A123M02 |
Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
|
|
| Wire Specifications |
| Specifications for: |
| A 641 / A 641M-03 |
Zinc-Coated (Galvanized) Carbon Steel Wire |
|
| PERFORMANCE OF BUILDINGS |
|
| Performance of Windows, Doors, Skylights and Curtain Walls |
| Test Methods for: |
| E 331-00 |
Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference |
| E 2128-01a |
Standard Guide for Evaluating Water Leakage of Building Walls |
|
| ROOFING AND WATERPROOFING |
|
| Felts and Fabrics |
| Test Methods for: |
| D 226-97a |
Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing |
| D 779-03 |
Standard Test Method for Water Resistance of Paper, Paperboard, and other Sheet Materials by the Dry Indicator Method |
|
| STEEL, STAINLESS STEEL, AND RELATED ALLOYS |
|
| Steel Reinforcement |
| Test Methods for: |
| A 568 / A 568M-04a |
Steel, Sheet, Carbon, and High-Strength, Low-Allow, Hot-Rolled and Cold-Rolled, General Requirements for |
Code Knowledge: 